Crude City Scooter Club

All signs point to us coming out tomorrow morning.

Done and done. First adjustment still had a little play that showed while riding. One more small adjustment and it seems good now. Nice fluid side to side steering, but no more play or shuddering while braking. Thanks!

So the steering head nut has come loose on Audrey's P200 again. Its got a wicked shimmy because of the play. I see that some people use a specialized hook spanner or something. Last time you guys tightened it up for her, I remember you tightening it with a drift and a mallet. I tried lightly, but di...

Hey all! Been forever and the ground is looking clean-ish. I was a bad scooter owner this winter. Forgot to put fuel stabilizer in and forgot to pull our batteries. It's probably not a big issue, but I want to get them cleared up a bit. Some of you guys were already out and about this year?

I remember Angelo saying he wanted one of these if he could get his hands on one.. This one seems fairly desirable! Wowza! http://www.ebay.com/itm/Honda-CB/331120055291?_trksid=p2050601.m2372&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D207%26meid%3D4614109138628440839%26pid%3D10...

Spotted a smallframe at 2:58 in the latest Petrolicious. Also, this episode is about a cool BMW R75/5. I love those boxer twins! http://youtu.be/HcAVp3299Cw

We'll be there!

So I'm going to assume South side Italian Centre at 1pm is the final plan.. Unless anyone else speaks up, John's suggestion is a go.

I wish I had 12v.. 6v is a joke at night, I don't want to ride by myself at night as my headlight is SOO dim. I'm going to convert when I decide to do an overhaul, but thats going to end up being a little pricy all together!

I think Audrey and I are down for this! Also, I hope it's an Ape!

Weather forcast is not too bad. If its not raining, we're up for going on a ride. Any suggestions?

When our hot water heater decided to die, this is what I want to get. I've wanted one for a while. No longer will you have to wait half an hour to get hot water again!

I'm no expert. But if you do end up pulling it apart possibly check the float needle. I'm not sure of how the lammy carbs are, but possibly the float height is out of spec? Just guesses on my part.

Anyone have plans yet? Meet at the west end Italian Market at 10am? Other suggestions?

Hey All, Just wondering if anyone has any suggestions on how to remove stubborn gasket material from an aluminum case cover(Honda)? I've got about 98% of it off, but the last little bit is not budging.. I got a little bit using a razor and WD40 being EXTREMLY careful not to mark the sealing surface,...