Anybody ordering parts these days?

coyoteran · Post by **coyoteran** » Sun Jul 19, 2020 6:51 pm

Two questions.

Is there currently a reputable parts dealer for modern Vespas in Canada that anybody can recommend. If not, is anybody doing a SIP order in the near future. I need a couple of small things and don't feel like spending 50 on shipping. Brake pads and front variator nut for the ET and a set of rear lens caps for the P200E.

T

jbcollier · Post by **jbcollier** » Tue Jul 21, 2020 7:56 am

Do you have a motorcycle shop close by? Both Parts Canada and Motovan show the brake pads in their catalogs. Parts Canada carries DP brakes (never heard of them) and the ET4 part number is 1722-0136. Motovan carries EBC brakes (good rep) and the part number is 361-4729.

Vespa Toronto West list the variator nut:

https://www.vespatorontowest.com/parts- ... 200cc.html

Minimum order is $15. They also carry the brake pads:

https://www.vespatorontowest.com/parts- ... io-mp.html

With the pads and the nut in the cart, the calculated shipping is $13.83 for regular parcel, $14.85 for expedited, and on up for even faster.

jbcollier · Post by **jbcollier** » Tue Jul 21, 2020 7:59 am

PS:

What are rear lens caps?

jbcollier · Post by **jbcollier** » Tue Jul 21, 2020 8:40 am

PPS:

It looks like we may be going to Calgary on the August 8 for a one-day ride in Calgary. Just an excuse to catch up with the folks down there. I know it is still far but it's closer than Edmonton. Love to see you there. Watch the forum for details.

coyoteran · Post by **coyoteran** » Tue Jul 21, 2020 10:30 pm

Thanks John. Looks like the Toronto shop is the way to go. Shipping from LA was going to kill me as was SIP. The, ahem, parts people at my local moto shop are lost as soon as you don't say Honda, Suzuki, Yamaha, etc

I tried to shop local but alas it was a bust. I meant the rear signal light covers. I bumped the P with the B and broke one.

I will talk to Charlene about Calgary. It is hard to convince her to travel these days for obvious reasons and now that daughter number one lives in Edmonton, it is harder to get her to travel to Calgary.

T

jbcollier · Post by **jbcollier** » Wed Jul 22, 2020 9:42 am

The rear turn signal lenses are available from ScooterWorks in Chicago. They have both in clear and only the left in amber. $7.29US each and they will ship by mail for $13US.

I'd cheerfully add anything to one of my orders but, after spending millions in the last year, it might be a while before my next. I will check in when I do though.

Another solution is lens repair tape from Canadian Tire (red only but still legal at the rear) and Amazon.

coyoteran · Post by **coyoteran** » Fri Aug 07, 2020 10:56 am

No parts yet and covid has introduced logistical difficulties so I am going to have to forgo the Cowville trip.

With the oldest daughter now living in Edmonton, the odds of a visit with a scooter in tow are definitely high.

Ride safe all, but not too safe.

T

jbcollier · Post by **jbcollier** » Fri Aug 07, 2020 12:38 pm

Calgary, wisely, told us to stay away as well.

jbcollier · Post by **jbcollier** » Mon Sep 14, 2020 10:14 am

I'm placing an SIP order this weekend. Need anything?

jbcollier · Post by **jbcollier** » Fri Sep 18, 2020 5:59 pm

Last call...

jbcollier · Post by **jbcollier** » Sat Sep 19, 2020 4:54 pm

coyoteran · Post by **coyoteran** » Mon Sep 21, 2020 10:13 am

I haven't connected for a while so I missed this. But on a positive note, I ordered the nut and the brake pads from the Toronto shop with no drama.

I might try to 3d print the P200 turn signal covers. I have some translucent filament that may fit the bill if I can work out the design. I have a 14 day quarantine coming up in a few weeks so I will have time.

T

jbcollier · Post by **jbcollier** » Mon Sep 21, 2020 10:40 am

Oh poop!

https://www.youtube.com/watch?v=oPwrodxghrw

jbcollier · Post by **jbcollier** » Thu Sep 24, 2020 11:36 am

Red alert !!

Red alert !!

Red alert !!

Doing one more order. Still want the lenses? If so, which ones? (osition and colour)

jbcollier · Post by **jbcollier** » Thu Sep 24, 2020 8:39 pm

Your P200 lenses are on their way.